Shortwave portable antennas

On this page you will find:

• Diamond HFV-8040
• YP-3 Portabel Yagi 20 - 6m
• ATX-1080 Multiband equipment antenna
• ATX-10 Monoband equipment antenna
• Diamond RHM-8B Portabelantenne 7-52 MHz
• Diamond RHM10 Portabelantenne 7-430 MHz
• Miracle Whip equipment antenna
• ATAS-25
• Buddipole 8-Band portable dipole
• Buddistick Portable Vertical antenna
• XR-100 portable dipole
• Diamond HFV-5 portable dipole
• MP-1 portable vertical antenna
• HF-P1 portable vertical antenna New
• R1 HF mini Dipole
• MFJ-1622 Balcony Antenna
• RHM-5/RHV-5 QRP equipment antenna
• MFJ-1954 3m telescopic radiators

HFV-8040 Compact Rotary Dipole for 80 and 40m

HFV-8040 Rotary Dipole

The HFV-8040 is a compact rotary dipole for 80 and 40m, as usual built in the excellent manufacturing quality by Diamond. The antenna is designed as a shortened trap dipole with end capacities. Due to the precise aligment possibilities of the end capacities the minimum SWR position can be tuned very effectively to the required band portion. As with all shortened antennas the useable bandwidth is limited, you have to use a tuner or re-align the antenna. The useable bandwidth without tuner is approx. 25kHz on 80m and 40kHz on 40m.

The relativetly small packing size of only 170cm makes the HFV-8040 also suitable as a vacation antenna or for portable fieldday operations. Installed, the dipole elements are a little bit longer than 5m, the rotating radius is only 3.6m due to the V shaped installation. The weight of the antenna is 7kg, a balun BU-50 is included in the shipment (PL connector). The included mast clamp is suitable for masts from 38 to 60mm diameter.

Diamond HFV-8040

YP-3 Portable Yagi Shortwave

'Yagi in a bag': Portable 3 element 6 band Beam for 20, 15, 17, 12, 10 and 6m.

YP-3

The YP-3 is a portable yagi for operation on shortwave on the bands from 20 to 6m. The 5-part boom ist quickly assembled with snap-on locks, the max. boom length is 3.1m. Mounted to the boom are 3 element holders which receive the elements, mounted with 3/8" threads. The middle element (radiator) has a PL socket, the coax feed is connected directly, without balun.

The elements of the YP-3 consist of 4 part each, also connected by 3/8" threads. In the center of the element coils are installed. The YP-3 includes 12 coils in total, 6 for 20m, 6 for other bands. On 10m and 6m no coils are necessary, the antenna works as a fullsize beam on these bands. The max. element length is 5.6m when operating on 20m.

When changing bands the length of the elements must be adjusted, for 6m also the length of the boom, additionally coils have to be changed on some band changes. The english manual lists all sizes in inch, a steel tape measure marked in ich is included in the shipment.

YP-3

The entire antenna YP-3 fits into a nylon bag with 90cm length. This ensure an easy and safe transport for the vacation, a fieldday or a small dx-pedition. The supplied mast clamp can be used up to a mast diameter of 42mm. The total weight is 5.8kg.

The design goal of the YP-3 portable yagi was a good compromise between bandwidth and gain. The antenna is useable as a fullsize yagi on the lower portion of the 6 band, and covers 28 to 29MHz on 10m. On both bands a veryy good gain and front/back ratio is achieved.

On 12 and 17m the small coils are used, the antenna covers the entire band with good gain and f/b ratio.

The bands 15 and 20m are much larger, here the YP-3 covers only a part of each band. Therefore there are two settings for CW and SSB segments. On 15m the SWR rises at the band edges, this can be compensated by adjusting the element length or with an antenna tuner. Despite it's small size the YP-3 offers a useable directionality and f/b ratio, better than a dipole at same height.

YP-3 Parts

ATX-1080 Multi band antenna 80 to 6m for FT-817, IC-703 etc.

ATX-1080 PL

Multi band antenna for all amateur bands from 80 to 6m incl. WARC bands. Band change is similiar to the Outbacker antennas, just change the position of a tap lead, precision adjustment is done with a telescopic tuning rod at the top of the antenna. Collapsed only 32cm long, extended 160cm. Max. power load 25 Watt. Available with various connectors, ideal for FT-817, IC-703, SG-2020, K2 and similiar transceivers.

ATX-1080Mk2 Adaptors

Carrying bag for ATX antennas

AT-xx Mono band HF antennas

Mono band radiators with BNC connector, available for all traditional bands from 80 to 10m, transport length 26cm, extended length 1.4m, power max. 20 Watt.

Type Band Order No. AT-10 10m 11190.10 39.50 EUR Buy now AT-15 15m 11190.15 39.50 EUR Buy now AT-20 20m 11190.20 39.50 EUR Buy now AT-30 30m 11190.30 39.50 EUR Buy now AT-40 40m 11190.40 44.90 EUR Buy now AT-80 80m 11190.80 44.90 EUR Buy now

RHM-8B Portable Antenna 7-50MHz

RHM-8B

Compact and lightweight portable antenna for shortwave 7 to 52 MHz. The antenna is tuned by moving the tap on the inner coil up and down. This assures a perfect match and a good efficiency of this antenna. Ideal for vacation and portable HF activities.

Transport length only 40cm, max. length 178cm. Max. power load up to 120W, weight only 285g, connector BNC plug. For radios with PL socket we recommend the angular PL/BNC adaptor , article 42360.

RHM10 Portable antenna/h2>

Info freight charges

RHM10

New

Similar as the antenna RH-8B but including 2m und 70cm with PL259-Connector

Transport length only 50cm, max. length 177cm. Max. power load up to 130W, weight only 300g, connector PL259

Order No.
11467	RHM10 Portabelantenne	199.00 €	Buy now

Miracle Whip: Portable antenna for 7-430 MHz

The Miracle Whip provides a simple and efficient means of improving the performance of you portable HF amateur radio transceiver when compared to the antenna normally supplied with the set. Operation is simplicity itself.
The Miracle Whip has been made as compact as possible, without compromising performance. Just pop it in a bag with your rig when going for a walk in the countryside or take it camping. Enjoy radio in the great outdoors without the hassle of erecting more complex antennas.
Designed with the Yaesu FT 817 and FT 897 in mind, the Miracle Whip can also be used on other low power HF radios up to a maximum output power of 25 watts P.E.P. The Miracle Whip features a 1.8m black whip and a higher Q toroid for even greater performance.

HF Operation
Connect the Miracle Whip directly to the antenna SO239 socket on the rear of your radio. If the radio has a selectable front / rear antenna function don't forget to select the rear socket. Extend the telescopic whip to its maximum length and then position it away from both obstructions and yourself.
Rotate the knob on the rear of the unit to select the desired band of operation between 7Mhz and 50Mhz. The unit is pre-tuned for optimum match on each band so no further adjustment is necessary.
VHF / UHF Operation
For VHF and UHF operation between 50Mhz and 440Mhz the tuning circuit is switched out, the unit becoming a simple whip antenna. It is then necessary to adjust the length of the telescopic whip to obtain the best match on the desired band. This is normally obtained by adjusting the length of the whip to an odd multiple of quarter wavelengths measuring the distance from the PL259 connector on the Miracle Whip.

ATAS-25 Portable antenna

Frequency range: 7/14/21/28/50/144/430MHz, Max Pwr input: HF/50MHz: 100W (SSB/CW), 50W (AM/FM), 144/430MHz: 50W (All mode) Height Max 2.2m, 0.6m for transporting * Weight: 930g. Supplied with radiating elements, radial elements for VHF/UHF, radial wires + spare radial wire, Allen key.

The ATAS-25 utilises a manual tuning system which resonates the radiating element for lowest SWR without the need for expensive mono-band resonating whip assemblies. It allows dual frequency operation on HF or 50MHz and either 2m or 70cm (duplexer not supplied). A very handy feature is that the ATAS-25 is designed to mount directly onto a standard camera tripod mount (not supplied) and makes up a portable antenna system ideal for tempory field operation but not recommended for long-term outdoor installation.

For some models, you may wish to purchase a diplexer or triplexer to avoid moving your cable from one antenna jack to another. When using the ATAS-25 with the FT-817, set Menu #07 to REAR for all bands.

Buddipole

Due to the ever growing list of products by Buddipole, we have moved the entire product selection to it's own page: Buddipole & Buddistick Products and accessories.

XR-100: HF portable dipole for 80 to 10m

HF portable antenna for 3.5 to 30MHz incl. WARC bands, max. power 100 Watt, so not only suitable for QRP rigs. 130c, long telesopes with exchangeable extension coils for each band, center part with short mounting tube and mast clamps, mounts easily on a balcony or any other provisional device. Connector PL. Extension kit Extension kit for XR-100, includes one mast peg with center part, mast clamps and two telescopes. With the existing coils a separate antenna for another band can be installed. Order No. 11470 XR-100 159.00 € Buy now 11470.1 XR-100 Extension kit 45.00 € Buy now Download instruction sheet for XR-100 (PDF, 61KB) Long test review with pictures by Philippe, ON4VP (PDF, EN, 470KB)

MP-1: Mobile- or portable antennas for 3.5 to 30MHz, plus 2m/70cm

New The Original by Superantennas USA! Now available again after a long time!

MP-1

The MP-1 is a universal antenna with 180cm length and max. 150 Watt power load. The center loading coil is adjusted with a sliding tap, just move the outer part of the coil up and down. The antenna has a 3/8" thread bolt for mobile use, suitable for the appropiate base mounts. For use while driving the telescopic part of the antenna should be replace with a steel whip (not available at WiMo). For portabale use a universal base with PL connector and a ground radial kit is included.
Without the center loading coil the antenna can be used on 2m and 70cm by adjusting the length of the telescope. The standard version covers all bands from 7 to 30MHz, for 80m operations an optional extension coil is available.
Especially for hte FT-817 a special mounting bracket is available which can be bolted to the side of the radio. The antenna is connected with a short PL cable (not included).

MP-80: 80m extension coil for MP-1

Mounting bracket for FT-817

Stand for antennas with 3/8" connector

Stativ

Stand for antennas with 3/8 "connection, separable. Connection of the Radio PL-jack, with 6.3mm Car accessory shoe for attachment of Radials, etc.

Portabel Vertical inkl. 80m Spule, 6-80m bis 200W

with 80m Coil

without 80m Coil

The perfect portable antenna on the go. It's small, lightweight and fits in every case. With just 37cm transport length, it is the best antenna on the go. They can be applied to all shortwave-bands of 80m - 10m and works as a telescopic antenna without tuning coil on 2m and 70cm. The clamp can rotate by 90 °, so the bracket can be mounted horizontal or vertical. At the desired operating frequency, the antenna is adjusted by the tuning on minimum SWR. For operation on 80m, an additional coil is mounted below the tuning coil, which is included.

HF-P1 complete

HF mini dipoles

R1 with dual band center part for two dipoles

Shortened dipoles for 160 to 6m. Total length around 360cm, transport length about 120cm, max. power 500 Watt PEP. Center part made of glass fibre reinforced nylon, connector PL female.

Nice companion for existing antennas or as a portable antenna. Two different center parts, straight or dual band one, are available. The dual band center part allows two different dipoles to be used the same time on any two bands.

Included with the center part is a short mast tube (500mm x 32mm dia.), allow-ing easy mounting to any vertical mast. Use mast clamps 23001 (not inluded) for easiest installation.

R1 with straight center part

Note: To order this antenna, order two items: the center part and at least one set of dipoles.

Straight center part

Dual band center part

Center parts shown with small mast (included)

MFJ-1622 portable antenna 40m to 2m

MFJ-1622

Small and lightweight antenna for restricted space situations and portable operations, works on 40 to 10, 6m and 2m. Use anywhere, on a balcony, on the window sill, on the camper... Collapsed only 57cm long, weight only 1.4kg, fits in onboard air luggage.
The antenna is made of a stainless steel telscope with loading coil, installed on a aluminum bracket. This bracket can be mounted on any surface for easy installation.
Included is a 10m long counterpoise with taps for each band. For operations the loading coil is shortened at certain taps, equally the counterpoise is unrolled to individual markings. Wit hsmall power the SWR can be adjusted precisely. Max. power load is 300 Watt PEP SSB, total length of antenna approx. 180cm.

Diamond RHM-5 / RHV-5 QRP portable antennas

The RHV-5 antenna are useable on 40, 20, 15 10 and 6m, to change bands one element has to exchanged or adjusted. Max. power load 20 Watt, weight only 280 gram, extended length 155cm, collapsed only 60cm. The antenna is equipped with a glass fibre whip, ideal for backpacking. Fits directly on QRP rigs like FT-817, IC-703 or similiar (see picture on the right).

MFJ-1954 3m telescope whip

Use it as an antenna by itself (10/12 and 15 Meters) or use it on top of a screwdriver antenna to greatly improve it's efficiency. Use it on many base-loaded antennas to extend coverage (10-80 Meters). Use it to make portable dipole antennas. Use it for any antenna purpose you want, but DON'T use it when driving!! Hex base threaded 3/8 x 24 stub.